We – EPG Team the most significant agricultural gearbox and pto factory in China with 5 various branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
How Can You Be Risk-free When Making use of PTO Shafts? First, make positive the shaft is shielded. This involves the driveline defend that handles the put into action driveline, and the learn shield which covers the universal joint and PTO stub shaft on the tractor.Maintain the shield so it can perform for you. PTO driveline shields are normally mounted on bearings, so they want to be taken care of. always REPLACE the shield when it is ruined or lacking.Up coming, maintain a safe length from it when in use. Maintain other folks absent, also. How considerably? A distance of two times your height is a excellent start.Allow only those who definitely should be in the location to be there. Preserve all young children absent!Always pay attention to what is going on. Most PTO victims were caught by surprise.If anything goes improper — end the machinery just take the PTO out of equipment, stop the motor and established the brake. Place the keys in your pocket ahead of operating on the machinery.When halting the equipment for any explanation — stop of work, lunch, repairs, or communication — take the PTO out of gear, stop the engine and set the brake.Road planers, dredges, and other products need power from some type of motor in purchase to complete their designed purpose. With out a energy take off, it would be essential to incorporate a 2nd motor to give the electricity necessary to run hydraulic pumps and other driveline hooked up gear. The lemon tube is suited for transmissible electricity of 16-35HP, it is the desired decision for large speeds and lower torque transmission. The two-lobe lemon tube grants lower vibrations up to 2600 rpm with lengths not exceeding 800mm. AC collection with 6-lobe tubes (star) tractor supply pto We pto drive shaft angle warmly pto extension tractor offer welcome 8n pto shaft the john deere x495 pto shaft close friends ford tractor pto shaft dimensions from pto shaft caught on mower all plastic protect for pto shaft the pto shaft basic safety chain planet! kerosakan travel shaft The organization was accredited by ISO9001:2008 Quality Administration Program.
3WPZ-1200G sort self propelled spray boom sprayer
3WPZ-1200G series of sprayer is ideal for spraying the medicament for the planter of bean, corn, cotton, grain.
Also for lawn,fruiter,vegetable, road side tree. The capacity could be 1200L, the spraying width could be 16m with 53hp.
Positive aspects:
•This sort of growth sprayer is a tractor mounted sprayer.
•Wide operating scope,spraying for bean,cotton,corn etc.
•Wide spraying with to be 16m max.and the operating angle of this tractor sprayer could be altered.
•The capability of mounted growth sprayer could be modified to satisfy diverse need from the person.
Model | 3WPZ-1200G self-propelled spray growth sprayer | Pump Kind | Plunger pump |
Engine Model | 4L68 (Changchai) turbocharged diesel engine | Pump Model | OS-5200 |
Power / Speed | 53 hp 2400r / min | Pump Strain | 0-45kgf/cm² |
Displacement Level | China III | Pump Stream | 220-240L / Min |
Gear | Forward equipment 4,reverse gear 1 | Pump Pace | 600-800r / min |
Drive Mode | Four-wheel push | Tank Capacity | 1500L |
Steering Method | Hydraulic steering | Spray Top | 0.5-three. m |
Mixing Technique | Circulating drinking water mixing | Nozzle Design | No.three |
Folding Approach | Hydraulic folding | Spray Angle | 110° |
Spray Width | 16 m | Nozzle Stream | 1.2L / min |
Ground clearance | 1.8 m(customizable) | System Operate Pressure | 0.3-.5Mpa |
Wheel Monitor | 1.95-two.6 m(adjustable) | 3 Filtration System | Tank inlet, pump inlet, nozzle |
Operating Performance | 21-thirty acres / hour | Battery | 12v / 120AH |
Walking Speed | ≤25Km / h | Front Tire Design | Tractor tires 9.five-24 |
Overall Dimension | 5800 mm x 2900 mm x 3700 mm | Rear Tire Model | Tractor tires 9.five-24 |
Weight | 3811Kg | Water Tank | 15L |
Q:Are you a manufacturing unit or trading company?
A:We are a factory.
Q: How does your manufacturing facility do regarding top quality control?
A: Quality is precedence. we always say great value to high quality controlling from the very beginning to the really end.
Q: Do you have a merchandise accessory?
A: Yes, we have the components of the merchandise.
Q:Can you customize the merchandise?
A:We can personalize the item.
Q: What’s your payment terms?
A: Payment terms is T/T or L/C,We accept all reasonable payment.
Q: How about delivery time of your machine?
A: The delivery time is in 60 working days. It depending your quantity.
The use of first equipment manufacturer’s (OEM) portion figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our company and the outlined substitution areas contained herein are not sponsored, approved, or created by the OEM.